Open Source & Linux Lab

It's better when it's simple

User Tools

Site Tools


etc:users:jcmvbkbc:hardware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Last revisionBoth sides next revision
etc:users:jcmvbkbc:hardware [2014/10/13 06:08] jcmvbkbcusers:jcmvbkbc:hardware [2016/08/07 00:34] – ↷ Page moved from user:jcmvbkbc:hardware to users:jcmvbkbc:hardware kel
Line 2: Line 2:
  
 ==== ARM-USB-TINY-H ==== ==== ARM-USB-TINY-H ====
 +Chip datasheet: http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf
 === Connector pinout === === Connector pinout ===
 <file> <file>
Line 16: Line 17:
   * 1, 2: Vcc (connected)   * 1, 2: Vcc (connected)
   * 4, 6 and the rest of the low row: GND (connected)   * 4, 6 and the rest of the low row: GND (connected)
-  * 5: RX +  * 5: RX (I) 
-  * 9: TX+  * 7: CTS# (I) 
 +  * 9: TX (O) 
 +  * 11: RI# (I) 
 +  * 13: RTS# (O) 
 +  * 17: DTR# (O): my modification
  
 == Driver == == Driver ==
   * http://ftdi-usb-sio.sourceforge.net/   * http://ftdi-usb-sio.sourceforge.net/
   * modprobe ftdi_sio vendor=0x15ba product=0x002a   * modprobe ftdi_sio vendor=0x15ba product=0x002a
 +  * echo -n "15ba 002a" > /sys/bus/usb-serial/drivers/ftdi_sio/new_id
 +
 +=== Xtensa JTAG ===
 +== Pin functions ==
 +  * 1: Vcc
 +  * 3: TRST#
 +  * 4: GND
 +  * 5: TDI
 +  * 7: TMS
 +  * 9: TCK
 +  * 13: TDO
 +  * 15: SRST# (doesn't work)
 +
 +== topology.xml controller line ==
 +  <controller id='Controller0' module='ft2232' probe='flyswatter' vid='0x15ba' pid='0x002a' usbser='OLVGHYS?' speed='10MHz'/>
etc/users/jcmvbkbc/hardware.txt · Last modified: 2016/08/08 20:53 by kel