Open Source & Linux Lab

It's better when it's simple

User Tools

Site Tools

You are here: О нас » /etc... » User pages » Осьмилис/jcmvbkbc/octofox sapiens » Linux port for Xtensa
etc:users:jcmvbkbc:linux-xtensa

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
etc:users:jcmvbkbc:linux-xtensa [2014/05/06 18:46] – status update jcmvbkbcetc:users:jcmvbkbc:linux-xtensa [2023/06/17 06:56] – jcmvbkbc
Line 6: Line 6:
   * [[.:linux-xtensa:patch-review-checklist]]   * [[.:linux-xtensa:patch-review-checklist]]
   * [[.:linux-xtensa:patch-pull-checklist]]   * [[.:linux-xtensa:patch-pull-checklist]]
 +  * [[.:linux-xtensa:rootfs]]
  
 ===== TODO ===== ===== TODO =====
  
-  * TIE coprocessors (23ae3f723c8996d47ef205e98cb7732bbde4775f) 
-  * ptrace (support latest GDB) (617244763e19a4eebb4fabe41ba56eb1ccbdb049, 23ae3f723c8996d47ef205e98cb7732bbde4775f, <del>ff1b10f85a1176d1eb8df433434b717f6f0841d4</del> (already upstream), <del>a2b61af3328025d6069e8bf9ff36f5288e11dba9</del>) 
-  * ticket spinlocks 
   * dynamic ftrace   * dynamic ftrace
-  * kprobes +  * kgdb/kdb 
-  * fixes for debuggability (continuous stack trace over exceptions at least)+  * kexec 
 +  * NX
  
 ===== In Progress ===== ===== In Progress =====
  
-  * highmem on cores with aliasing cache +  * kprobes 
-  * support xtfpga audio hardware in ALSA +  * [[.:linux-xtensa:esp32]] 
-    * clock synthesizer +  * [[.:linux-xtensa:esp32s3]] 
-    * I2S interface + 
-  * deliver signals raised in double exceptions+===== Features by release ===== 
 +==== Linux 6.4 ==== 
 + 
 +  * support for FDPIC ELF executable format on noMMU 
 + 
 +==== Linux 6.1 ==== 
 + 
 +  * support for static PIE ELF executable format on noMMU 
 +  * partial support for FDPIC ELF executable format on noMMU (signal delivery is broken, fixed in 6.1.31) 
 + 
 +==== Linux 5.19 ==== 
 + 
 +  * support coprocessors on SMP. 
 +  * support protection faults on noMMU. 
 +  * support full tickless operation. 
 +  * KCSAN. 
 +  * hibernation. 
 + 
 +==== Linux 5.18 ==== 
 + 
 +  * support compiler plugins (with gcc-12 and newer). 
 +  * support for kernel ABI selection. 
 +  * removed dependency on compiler's libgcc. 
 + 
 +==== Linux 5.16 ==== 
 + 
 +  * support for cores without windowed registers. 
 +  * call0 ABI kernel. 
 + 
 +==== Linux 5.13 ==== 
 + 
 +  * GDBIO semihosting. 
 + 
 +==== Linux 5.9 ==== 
 + 
 +  * syscall audit. 
 +  * seccomp filter. 
 + 
 +==== Linux 5.6 ==== 
 + 
 +  * exception vectors can be attached to the rest of the kernel or placed at specific address. 
 + 
 +==== Linux 5.5 ==== 
 + 
 +  * eXecute In Place (XIP) kernel. 
 + 
 +==== Linux 5.4 ==== 
 + 
 +  * support for call0 ABI userspace. 
 + 
 +==== Linux 5.3 ==== 
 + 
 +  * 'virt' board (sim with PCI, corresponding board model available in QEMU since v4.2). 
 + 
 +==== Linux 5.2 ==== 
 + 
 +  * support for cores with exclusive access option. 
 +  * basic support for cores with MPU. 
 + 
 +==== Linux 5.1 ==== 
 + 
 +  * generic spinlock/rwlock. 
 + 
 +==== Linux 5.0 ==== 
 + 
 +  * memtest. 
 +  * Jump labels. 
 +  * tracehook. 
 +  * syscall tracepoints. 
 +  * multiple coprocessor fixes. 
 +  * SMP fixes. 
 + 
 +==== Linux 4.16 ==== 
 + 
 +  * KASAN. 
 +  * SSP. 
 +  * allocation of DMA buffers from high memory. 
 +  * support DMA_ATTR_NO_KERNEL_MAPPING. 
 +  * kernel is built with -mtext-section-literals and -mno-serialize-volatile. 
 + 
 +==== Linux 4.9 ==== 
 + 
 +  * New kernel memory layouts: with 256MBytes and 512MBytes of low memory. 
 +  * Configurable KSEG physical memory address and kernel load address. 
 +  * Custom sysmem boot time memory allocator is replaced with memblock. 
 +  * KMEMLEAK. 
 +  * reserved-memory DT node. 
 +  * Cadence Configurable System Platform (CSP). 
 + 
 +==== Linux 4.6 ==== 
 + 
 +  * Hardware breakpoints/watchpoints. 
 +  * ioremap for memory outside KIO region. 
 +  * Big endian: serial, network, i2c work. 
 + 
 +==== Linux 4.4 ==== 
 + 
 +  * DMA to high memory. 
 + 
 +==== Linux 4.3 ==== 
 + 
 +  * Hardware perf counters and perf support. 
 + 
 +==== Linux 4.1 ==== 
 + 
 +  * ALSA playback driver for XTFPGA. 
 + 
 +==== Linux 3.19 ==== 
 + 
 +  * noMMU. 
 + 
 +==== Linux 3.17 ==== 
 + 
 +  * Highmem on cores with aliasing cache. 
 +  * New (simpler) method of configuring for specific core variant. 
 + 
 +==== Linux 3.16 ==== 
 + 
 +  * Stability: xtensa linux may be rebuilt natively. 
 + 
 +==== Linux 3.15 ==== 
 + 
 +  * Highmem. 
 +  * KC705 board. 
 + 
 +==== Linux 3.14 ==== 
 + 
 +  * SMP. 
 +  * Futex. 
 +  * register spilling overhaul. 
 +  * OpenCores ethernet works when connected to gigabit network. 
 +  * c67x00 USB host is usable on XTFPGA. 
 +  * TAP network works in ISS. 
 + 
 +==== Linux 3.12 ==== 
 + 
 +  * Kernel preemption. 
 + 
 +==== Linux 3.11 ==== 
 + 
 +  * Multihit exceptions fixed. 
 +  * Static function tracer. 
 + 
 +==== Linux 3.10 ==== 
 + 
 +  * MMUv3 cores. 
 +  * Lockdep/stack tracing. 
 + 
 +==== Linux 3.9 ====
  
-===== Done ===== +  * TLS (THREADPTR register). 
-=== Highmem support === +  * Oprofile. 
-Done, in the mainline: +  * ISS simdisk.
-<code> +
-6555910 xtensa: add HIGHMEM support +
-</code> +
-=== Limit PHY connected to OpenCores MAC to 10/100 MBits/s speeds === +
-Done, in the mainline: +
-<code> +
-445a48c net: ethoc: don't advertise gigabit speed on attached PHY +
-a13aff0 net: ethoc: set up MII management bus clock +
-</code> +
-=== SMP support === +
-Done, in the mainline: +
-<code> +
-99d5040 xtensa: keep a3 and excsave1 on entry to exception handlers +
-5515daa xtensa: fix arch spinlock function names +
-6235153 xtensa: update clockevent setup for SMP +
-cbd1de2 xtensa: move built-in PIC to drivers/irqchip +
-26a8e96 xtensa: add MX irqchip +
-f615136 xtensa: add SMP support +
-49b424f xtensa: implement CPU hotplug +
-</code> +
-=== Clean up and fix ISS networking === +
-Done, in the mainline: +
-<code> +
-3f3cd60b xtensa: ISS: clean up iss-network driver +
-8c8ad85 xtensa: ISS: fix command line parameter name +
-358b181 xtensa: ISS: init network interface name before the probe +
-8991fd8 xtensa: ISS: drop IP setup, clean up MAC setup +
-f6ac5a1 xtensa: ISS: enable iss_net_set_mac +
-35e14b4 xtensa: ISS: always use fixed tuntap config +
-a6e16b9 xtensa: ISS: clean up diagnostic, increase verbosity +
-</code> +
-=== oprofile === +
-<del>8c502ca703956e56bf191774e4169752f0f71c8e, 7dd1d39e70769f2dd7a6a508d58b187ed8d1cb95</del>+
  
-Done, in the mainline: +==== Linux 3.8 ====
-<code> +
-e6ffe17 xtensa: add support for oprofile +
-74f5bf0 xtensa: fix oprofile building as module +
-</code> +
-=== simdisk === +
-<del>1a955825662fa378d447b91485d9fe2438124b0a, 8bcbc3adb5c5bfdbd96078c1e68916be859c832d</del>+
  
-Done, in the mainline: +  * Device trees. 
-<code> +  * uImage generation. 
-b6c7e87 xtensa: ISS: add host file-based simulated disk +  * IRQ subsystem overhaul (IRQ domains, medium-priority interrupts). 
-</code> +  * XTFPGA boards. 
-=== Medium level interrupts in less hacky way === +  * s32c1i-based atomic/bit operations and spinlocks.
-<del>489fb47c75772e3a41ef3e988eb0c0e512592085</del>+
  
-Done, in the mainline: +==== Linux 3.7 ====
-<code> +
-2d1c645 xtensa: dispatch medium-priority interrupts +
-895666a xtensa: disable IRQs while IRQ handler is running +
-</code> +
-=== Interrupt management === +
-Done, in the mainline: +
-<code> +
-2206d5d xtensa: add IRQ domains support +
-</code> +
-=== Cache aliasing aware mmap === +
-Done, in the mainline: +
-<code> +
-de73b6b xtensa: avoid mmap cache aliasing +
-</code> +
-=== Atomics (arch/xtensa/include/asm/atomic.h, bitops.h, spinlock.h) and check for S32C1I === +
-Merged in the eb0a9bf31fdbcee9463c0f42fbf4a292ef149a7d, pick up from individual files.+
  
-Done, in the mainline: +  * Overall architecture port overhaul, mainline is alive again, builds and runs. 
-<code> +  * There were dragons prior to that release.
-2f6ea6a xtensa: display s32c1i feature flag in cpuinfo +
-733536b xtensa: save and restore scompare1 SR on kernel entry +
-c622b29 xtensa: initialize atomctl SR +
-28570e8 xtensa: add trap_set_handler function +
-0027312 xtensa: add s32c1i sanity check +
-219b1e4 xtensa: add s32c1i-based atomic ops implementations +
-e5a9f6a xtensa: add s32c1i-based bitops implementations +
-71872b5 xtensa: add s32c1i-based spinlock implementations +
-599bf77 xtensa: fix mb and wmb definitions +
-</code> +
-=== Generic kernel_thread & friends === +
-Done, in the mainline: +
-<code> +
-3306a72 xtensa: switch to generic kernel_thread() +
-f0a1bf0 xtensa: switch to generic kernel_execve() +
-dc241f2 xtensa: switch to generic sys_execve() +
-</code> +
-=== Support for Tensilica FPGA boards (xtfpga) === +
-  * [+] serial +
-  * [+] ethernet +
-  * [+] FLASH +
-  * [-] audio +
-In the mainline: +
-<code> +
-0d456ba xtensa: add support for the XTFPGA boards +
-5584b4d xtensa: add XTFPGA DTS +
-</code> +
-=== Device trees support === +
-Done, in the mainline: +
-<code> +
-da844a8 xtensa: add device trees support +
-</code> +
-=== MMU v3 === +
-Done, in the mainline: +
-<code> +
-e85e335 xtensa: add MMU v3 support +
-93e294a xtensa: document MMUv3 setup sequence +
-</code>+
  
etc/users/jcmvbkbc/linux-xtensa.txt · Last modified: 2023/07/12 06:25 by jcmvbkbc